Manufacture

Manufacture is adapted according to the customer’s needs, applying whatever engineering is necessary in each case.
A complete system is one which can clean, rinse, dry with hot air and filter.

Cleaning

To the cleaning tank one may add a superficial cleaning system or skimmer (it stops clean items from having to pass through a dirty layer when they are being removed from the tank). The dirty liquid that is swept from the surface is channeled through filters and returns to the tank to be reused. This system allows great economy in cleaning solutions.
The tank is heated by external electric resistors adjusted according to the characteristics of each tank.

Rinsing

It may be carried out ultrasonically or by overflow.

Drying

This is done using hot air which can be filtered and produced by a heater designed for each case. The door may be manual or pneumatic.

Automation

Any machine can be made automatic so as to carry out the process with a minimum about of hand labor.
Another option is a semiautomatic version in which the operation times are programmed but leaving in hands of the operator the loading, moving and unloading of the items to be cleaned.

Submersible Transducers

These are stationary stainless steel boxes that emit the ultrasound waves.
They can be placed at the bottom or on the sides of an already existent tank that, according to the case, may even be made of plastic.
These transducers can be installed in tanks of any size; we have the equipment to procure a maximum effect in each case.

Sonotrodes

These are cylindrical transducers capable of a 360º emission of ultrasound waves. They are manufactured in different sizes and with different power of emission.
They are ideally used in different tanks without needing any special preparation.

Sonotrodes for cleaning of cavities

This equipment consists of a titanium rod that emits ultrasound waves particularly from one of its tips. This allows it to be located exactly in the area to be cleaned.

Ultrasonic Shaker/Mixer

This equipment is placed on the outside of tubes, in which they produce movement of the liquid so that as the items to be cleaned pass by, the desired effect is obtained.

Español │ English